速率模式飞轮姿态控制系统飞轮组合平稳切换方法

对速率模式飞轮姿态控制系统的能控性、稳定性和飞轮组合切换过程进行了研究，揭示了在飞轮组合切换过程中引起卫星姿态抖动的原因，提出了通过对残余角动量进行卸载并将卸载函数同时前馈到系统输入的方法，以保持卫星姿态的稳定度。从理论上证明了可引入残余角动量进行卸载，将卸载函数同时前馈到系统输入，并且不改变原系统的能控性和稳定性。给出了某卫星飞轮切换应用实例，说明了飞轮组合平稳切换方法的有效性。     

Implementation of tactical maneuvers with maneuver libraries

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical maneuvers. First, the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in battlefields. The 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal inputs. To track the desired trajectory, we design the Attitude Command Attitude Hold (ACAH) system and the Rate Command Rate Hold (RCRH) system using Model Following Controller (MFC). Moreover, the Line-of-Sight (LOS) guidance law is designed. In particular, the CONDUIT® is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities (HQ) criteria. Finally, flight simulations are performed for the longitudinal loop, immelmann-turn, and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver libraries. This study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

测定钡含量的快速方法

本文研究了测定钡盐中钡含量的快速方法。该法是基于被测的钡离子与过量的铬酸钠标准溶液反应形成铬酸钡沉淀，剩余的铬酸根离子以溴甲酚绿-甲基红为混合指示剂，用盐酸标准溶液滴定，而间接测定钡的量。该法操作简便、快速，可应用于多种钡盐中钡的测定。     

磁粉检验标准环形试块的机理分析

为了分析控制磁粉检验系统综合性能的标准环形试块的机理，首先建立一个计算漏磁场的简化数学模型，然后解标量磁位的=维拉普拉斯方程，求出被磁化的环形试块上圆孔产生的漏磁场，计算环形试块表面的磁粉受力，分析其特点并得出相应的结论。     

与电网电压同步的基准正弦电路设计与实现

提出并分析研究了一种全数字化技术的、与电网电压同步的基准正弦电路，给出了关键电路参数设计准则。试验结果与理论分析一致。该基准电路具有输出正弦电压与电网电压同步、THD小、幅值可调但不受电网电压波动的影响、简单实用、价格低廉等优点，在高频交流环节AC／AC变换系统、不间断电源系统UPS中具有重要应用价值。     

基于UKF的四元数载体姿态确定

对于低精度高噪声的传感器组成的低成本姿态测量系统,本文引入U nscen ted K a lm an filtering(UKF)用于姿态确定,设计了有陀螺测量和四元数差分法的无陀螺测量两种UKF滤波器;应用四元数避免了欧拉角法的奇异问题;用高斯-牛顿误差最小法将六维参考向量转化为四元数,作为观测量的一部分,使九维非线性观测方程转化为七维线性方程进行滤波,减少了计算量;应用仿真数据进行算法验证,成功得到姿态估计;对两种算法在低速和高速状态下进行验证,仿真结果表明了该方法的有效性。     

捷联惯导系统的圆锥误差补偿算法研究

非互易向量的确定与补偿是影响高动态、恶劣振动环境下捷联惯性导航系统姿态矩阵计算的重要问题。为了补偿由此引起的圆锥误差，本文对一些传统算法进行了分析和研究。由于以往各种算法一般都需要输入信息为角度信息，但对于高动态、恶劣振动环境，角速度信息更有工程意义，所以针对输入信息为角速度的情形，提出了一类新的姿态算法，通过对比传统的算法，新算法在同样计算量、存储量的情况下有较优的性能，算法的精度较传统的算法高。另外，对新的姿态算法进行了误差分析．为其参数选择提供了选择标准，有工程实用价值。     

基于TDRSS的低轨卫星定轨方法研究

利用跟踪与数据中继卫星系统（TDRSS）组成天基测控系统对低轨卫星进行轨道确定，并讨论了低轨卫星在TDRSS系统覆盖区域的时间段，以改进的Gauss-Newton算法为基础，设计了非线性迭代的微分轨道改进算法，有效抑制了算法截断误差。仿真实验证明基于TDRSS的测控技术可显著提高测控覆盖率，减少地面测控站压力，有效确定低轨卫星轨道，定轨位置误差小于20m，速度误差小于0．01m／s，能满足一般低轨卫星的定轨精度要求。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。